|
Nature2
|
 |
|
|
|
The Natural Alternative to Chlorine
- Clean, clear water without harsh chemicals
- No more chlorine smell or eye irritation
- Simply drop it into your spa filter
-
Improves water quality, reducing skin irritation and
dryness
|
|
Benefits
- Simply drops right into your filter
- Works with your existing filtration system
- Hassle-free maintenance
- Leaves water softer and clearer
Product Specifications
- Available for spas: Up to 500 gals
- Works with all spa flow rates
- Cartridge lasts 4 months
|
Nature2
Spa uses patented mineral-bed technology to destroy
bacteria. Its revolutionary process significantly improves
the look, feel and smell of your spa water, by dramatically
reducing chlorine and bromine requirements. If used with
MPS, the most recommended spa oxidant, Nature2
Spa becomes a complete spa sanitizing system - the only
non-chlorine spa sanitizing option available. And managing
your spa is easier than ever; Nature2
Spa slips into your spa filter and lasts up to four months. |
Nature2 Spa Recipe
Ingredients
• Nature2 Purifier
• Non-chlorine oxidizer (potassium peroxymonosulfate)*
• Nature2 Spa Test Strips** or Test kits (pH, total alkalinity)
• pH and total alkalinity adjusting chemicals
• Dichlor
|
|
When: |
What to do: |
|
Purifier Start Up |
Drain and refill your spa. Balance water per dealer
guidelines. Add 1 teaspoon of dichlor to spa per
250 gallons. (Note: 1 teaspoon
= 1/4 ounce = 7 grams.) |
|
Every Day |
Run spa according to recommendation supplied to
you by the manufacturer of your spa |
|
Before Each Use |
Add 1 tablespoon of potassium peroxymonosulfate
(MPS) to spa per 250 gallons
(Note: 1 tablespoon = 1 tablet = 3/4 ounce = 21
grams.)
A convenient way to insure proper MPS level
is to use a Nature2 Spa Test Strip. If
the Nature2 Spa Test Strip indicates
a low level of MPS, add 1 tablespoon of MPS to spa
per 250 gallons and retest. |
|
Once A Week |
Add 3 tablespoons of potassium peroxymonosulfate
to spa per 250 gallons. Check
and adjust pH and total alkalinity. A convenient
way to check pH and total, alkalinity levels is
to use a Nature2 Spa Test Strip.
|
|
Every 4 Months |
Drain and refill your spa.
Replace Nature2 purifier, repeat purifier
start-up. |
|
As Needed |
If water looks hazy, shock treat with 1 teaspoon
of dichlor per 250 gallons (approx. 1000 litres)
|
|
|
|
|
|
|
|
